Nikon Z6/Z7 Firmware 2.0 veröffentlicht

[Mediamind]

Angekündigt und nun auch erschienen: Die Firmware Version 2.0 für die Z6 und das Schwestermodell Z7. Auf folgende Änderungen dürfen wir uns freuen:

• Added eye-detection AF for use when taking photographs. To enable eye-detection AF, select:
- AF-S or AF-C for Focus mode in the PHOTO SHOOTING MENU
- Auto-area AF for AF-area mode in the PHOTO SHOOTING MENU
- Face and eye detection on for Custom Setting a4 (Auto-area AF face/eye detection) in the CUSTOM SETTING MENU
If the camera detects the face of a portrait subject, the face will be enclosed in an amber border indicating the focus point. If the subject’s eyes are detected, an amber border indicating the focus point will appear around either eye. If the camera detects more than one face or eye, triangles will appear to either side of the focus point; to position the focus point over a different face or eye, press the multi- or sub-selector left or right.
• Improved autofocus performance for photos and movies shot under low light: -3.5 – 19 EV (low light autofocus -6 – 19 EV), measured in photo mode with single-servo AF (AF-S) at ISO 100 and 20°C with an f/2 lens.
• The following improvements have been made to the Continuous H (extended) option for Release mode:
- Not only focus but now also exposure will respond to changes in the subject during shooting
- The burst shooting display after the memory buffer fills is now easier to read
• Reduced the length of time the display turns off (the blackout period) when pictures are taken with On or On (monitor only) selected for Image review in the PLAYBACK MENU.
• Item d5 in the CUSTOM SETTING MENU, formerly Electronic front-curtain shutter, has been renamed Shutter type and offers a choice of Auto, Mechanical shutter, and Electronic front-curtain shutter. If Auto is selected, the camera will automatically choose a shutter type according to shutter speed.
• Changed the color the focus point turns when the AF-ON button is pressed or the shutter-release button is pressed halfway with Auto-area AF selected and face detection or target tracking active.
• Edited and revised help text.
• Fixed the following issues:
- The camera would stop responding if certain operations were performed while HDMI output was in progress with 3840 x 2160 (4K UHD) selected for frame size.
- The value selected for maximum sensitivity would sometimes be exceeded during movie recording in mode M with On selected for Auto ISO control (mode M) if Active D-Lighting was enabled.
- The items in My Menu would sometimes not display correctly.

Hier der Link:
https://downloadcenter.nikonimglib.com/ ... w/327.html

[pillepalle]

Es gibt jetzt für die Z6/Z7 das Firmware-Update 2.01 in dem einige Probleme mit der AF-Messfeldsteuerung behoben wurden.

https://downloadcenter.nikonimglib.com/ ... w/332.html

VG

[Mediamind]

Darüber hinaus scheint es nun auch Augen AF im Videomodus zu geben. Ich bin gespannt, wie gut das läuft.

[pillepalle]

@ Mediamind

Wo hast Du das denn gelesen? Ich kann im Videomodus noch nichts von einem Eye-AF sehen...

VG

[Mediamind]

Hier steht es:

Filmaufnahmen
- Autom. Messfeldsteuerung als Option für AF-Messfeldsteuerung im Menü FILMAUFNAHME gewählt
- Gesichts- u. Augenerkennung ein oder Gesichtserkennung ein als Option für Individualfunktion a4 (Gesichts-/Augenerk.-AF (Auto)) im Menü INDIVIDUALFUNKTIONEN gewählt

https://downloadcenter.nikonimglib.com/ ... w/332.html

[pillepalle]

Der Menupunkt in den Individualfunktionen heißt nur so (Gesichts- und Augenerkennung), die Augenerkennung funktioniert da aber noch nicht.

VG