Seite 1 von 1

EOS 7D: auf Windows: TimeCode .THM auslesen? U.a. Fragen...

Verfasst: Mo 26 Jul, 2010 12:44
von thsbln
Hallo,

wie kann man denn eine .THM-Datei öffnen, um die darin enthaltenen Daten auszulesen?

Und gibt es mittlerweile eine Lösung, daraus dann auch die mov-Dateien mit einem Timecode zu versehen?

Falls nicht, wie handhabt Ihr denn die Sache mit dem fehlenden Timecode, gerade bei verschiedenen Interview-Clips? (Meine Notlösung ist es, jedem Clip in Vegas das Timecode-Plugin zuzuweisen, das ist dann allerdings fürs Transkribieren von Interviews nervig, wenn man tausendmal den Timecode 02:10:25 plus Dateinamenkürzel dazu notieren muß, um nachher wieder eine Stelle zu finden - dagegen war mein Consumer-MiniDV-Schei**erchen richtig luxuriös).

Und noch eine Frage: ich hab Kameraton und O-Ton von 'nem externen Gerät: jetzt synchronisiere ich das Ganze, dann habe ich aber zwei Audiospuren - gibt es ein Script o.ä., das die Audiospuren austauscht, ohne dass ich nochmal neu rendern muss?

Vielen Dank!

Re: EOS 7D: TimeCode und generelle Infos aus .THM auslesen? U.a. Fragen...

Verfasst: Mo 26 Jul, 2010 12:55
von thsbln
da habe ich gerade was gefunden:

http://www.videotoolshed.com/product/42/qtchange/2
QtChange
For: Win / Mac


A lot of people now use it to add timecode / reelnames to DSLR shot video, in order to have dupe detection.
But it can used for a lot of other workflows as well.
(Eg better media management of non-timecoded sources.)

There is new Avid support:
Speed changes to import worry free, or import trough an ALE and get TC and TapeName info as well!

And it now can also output BWF files, with or without speed changes.
All BWF files will be 48 Khz, even if the source is 44.1

A small word of wisdome:
30 FPS from the Canon 5D mark II can in fact be used in a 29.97 FCP timeline.
You then have a 1:1 frame relationship. This is good.
BUT, your sound will be out of sync.
This has nothing to do with this application!
So it's best to first conform the clip to 29.97, then add Timecode, then edit.
A brilliant new feature is to get the original time from the Canon's metadata.
Not only it is more accurate (1/100 of a second), but you can now transcode first to anything you like, and then add the timecode.
So make sure your THM files travel all the way with whatever form you render to!
(Just copy them into the same folder as you render to.)

This tool will let you batch alter QT files.
Use it to alter properties, or to add TC / Reel info.
It is compatible with QT files created by Nikon or Canon cameras.

So with this, you can add Timecode, either Rec Run style, or Free Run style.
(In the case of Free Run style, time and date from the shooting can be used for TC / reel info.
Probiere es gerade aus, komme aber auf Anhieb nicht damit klar...

Re: EOS 7D: TimeCode und generelle Infos aus .THM auslesen? U.a. Fragen...

Verfasst: Mo 26 Jul, 2010 13:28
von Axel
Mit dem Canon Import-Plugin für FinalCut werden auch Metadaten mit in den importierten mov übernommen. Im Falle der EOS-DSLRs ist der Timecode Zeit-Stunde-Minute-Sekunde-Frames in Bildfrequenz. Im Augenblick wäre das z.B. 13:27:45:17 (oder so). Die Alternative ist, einen Timecode nachträglich zu generieren, wie oben beschrieben.

Re: EOS 7D: TimeCode und generelle Infos aus .THM auslesen? U.a. Fragen...

Verfasst: Mo 26 Jul, 2010 13:38
von thsbln
Danke,

habe zu erwähnen vergssen: Windows.