BMD Camera Firmware 10.0 für URSA Broadcast G2, PYXIS 6K and PYXIS 12K

[freezer]

Camera 10.0 is now available on our website. This release adds support for pre-recording and four channels of audio recording support to URSA Broadcast G2, PYXIS 6K and PYXIS 12K.

We've also added dynamic fan control when PYXIS 12K goes into record, so the fan speed drops down while recording, then spins back up again when recording is stopped. We have been quite conservative with the fan speed in the initial release, but even when the fan is spinning slower, the camera will still run a long periods without overheating. Of course, the body will get a bit warmer but this is entirely normal. The fan will still automatically spin fast should the camera get too hot.

Release notes below:

Blackmagic PYXIS 12K

• Adds dynamic fan control when camera is recording.

Blackmagic PYXIS 6K
Blackmagic PYXIS 12K

• Adds pre-record feature.
• Adds support for 4 channel audio recording.
• Adds support for mono headphone monitoring.
• Adds 0% option for frame guide opacity settings.
• Adds new Camera Control REST API commands.
• Adds support for inhibiting proxy recording.

Blackmagic URSA Broadcast G2

• Adds pre-record feature.
• Adds support for 4 channel audio recording.
• Adds support for mono headphone monitoring.
• Adds 0% option for frame guide opacity settings.
• Adds new Camera Control REST API commands.
• Adds support for inhibiting proxy recording.
• Improved Blackmagic Cloud functionality.
• Improved B4 lens compatibility.

[freezer]

Dazu gibt es auch aktualisierte Handbücher:

https://documents.blackmagicdesign.com/ ... Manual.pdf

https://documents.blackmagicdesign.com/ ... Manual.pdf

Der Audiobereich wurde überarbeitet - es gibt nun einen Solo-Button bei jedem Input im Menü, um festzulegen welche Kanäle am Kopfhörer abgehört werden können.

Audio.PNG

Pre-Record wurde auch clever eingebaut:
Man hat die Wahl zwischen Immer-An oder Clip-basiert.
Und die Aufnahmedauer geht von 5, 10, 20, 30 Sekunden bis hin zu 1, 2, 5, 10 Minuten.